Dia. of cut: 7/8''. Cutting Depth: 1''
Carbide Tipped Annular Cutters with ONE-Touch Shank
CBN ground. ANSI Standard
Large holes can be drilled up to ten times faster than regular drills bits
Make overlapping holes, slotting holes and edge cuts
RuiXin Tools - 7/8" X 1" Cutting Depth, Carbide Tipped Annular Cutters with One-Touch Nitto Shank
Cutting Diameter: 7/8"
Cutting Depth: 1"
Carbide Tipped Annular Cutters with ONE-Touch Shank
CBN ground
ANSI Standard
Cuts holes in steel accurately, quickly & safely
Large holes can be drilled up to ten times faster than regular drills bits
Make overlapping holes, slotted holes and edge cuts
Machine-finish hole-no reaming needed when used with Lubricant
American Standard
Carbide tipped for long life and quick, efficient and fast cutting through rust and corrosion.
Center-free design creates through holes by cutting only the periphery of the hole for greater productivity in comparison to twist drills; it cuts clean, bur free hols.
Precision pilot pins eject the center as a plug of steel.
Can use on abrasive and tough-to-cut materials
More cutting teeth to distribute the load evenly so that increase tool life and achieve faster feed rates Maximize cutting performance of any portable magnetic drill press.
Feature a length flute to pull chips out when deep in the hole
Carbide tipped cutting edges can be run at a higher speed than HSS, making increased wear resistance and suitability for higher cutting temperatures.
Produces little slag and few chips for easy disposal. this tool geometry maintains better chip flow
3/4" Weldon shank flats for fast loading and better rigidity which suitable for most Magnetic drills or can be used in a drill press, mill, or lathe.
And this combined Nitto shank which and the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed to be mounted and removed without the use of a tool. This reduces the time needed to replace cutters.
Copyright © Nanhe Ruixin Tools Co., Ltd All Rights Reserved.
Sitemap | Technical Support: